2 Aspects to Choose Self-Loading Concrete Mixer

There are various self-loading concrete mixer trucks in the market, which makes the choice more difficult. How to choose self-loading concrete mixer truck that suit your business according to your own needs?

CONTENT

1. What is self-loading concrete mixer truck?

2. How to choose self-loading concrete mixer truck?

3. Conclusion

1. What is self-loading concrete mixer truck?

The self-loading concrete mixer truck is a very practical machine that has appeared in the past few years. It integrates all kinds of functions of a loader, a mixer and a conveyor. For example, it can realize the functions of loading, mixing, and unloading.

According to the output of concrete mixed of each mixing tank, there are roughly 7 types of self-loading concrete mixer trucks produced by Zhengzhou Talenet, ranging from 1.2m3 to 6.5m3 (For details, please refer to the product page for details).

Each type of self-loading concrete mixer truck has its own characteristics. For example, the 1.2m3 self-loading concrete mixer truck has a width of only 1800mm and can walk freely on various construction sites, especially on narrow roads such as country roads. However, the accompanying disadvantage is that the output is too small, which is only 1.2m3 per mixing tank. Such output may be useful for small construction projects at home, but it is completely insufficient for larger projects. Therefore, a slightly larger capacity self-loading concrete mixer truck is the better choice of more people who work on medium-sized construction projects.

2. How to choose self-loading concrete mixer truck?

How to choose self-loading concrete mixer truck is complicated question, and we talk about 2 main aspects about it.

Configuration

Choose a self-loading concrete mixer truck, the configuration is important. For a self-loading concrete mixer truck, the hydraulic system and the mixing tank are two essential parts.

The self-loading concrete mixer truck often operates under high load, so the stability of the hydraulic system must be very high. When purchasing a self-loading concrete mixer truck, be sure to ask what brand of hydraulic oil pump and motor are used and how their performance is. Especially in the details, the characteristics of a brand can be seen mostly in the details, so the connection materials and joints in the hydraulic system should be all inquired clearly.

The mixing tank is the only place for mixing concrete, and the wear resistance must be good. The blades in the mixing tank also need high strength and wear resistance. Therefore, the material used is very important, but the material is not easy to distinguish, so in this case, follow the big brands’ choices, because they will basically not cut corners.

The mixing tank of Talenet is not bad. We are one of the earliest large factories to produce self-loading concrete mixer trucks. The mixing tank is different from other brands of mixing tanks. The material is made of high-strength wear-resistant steel plate. During the mixing process, such a mixing tank can evenly mix cement, aggregates, sand, etc., to ensure that the sand and gravel do not settle, and the concrete produced meets the standards.

Output

The specific selection principle can be based on 100m3. If you want to produce more than 100m3 of concrete in one day, then 2.0m3, 3.5m3 or 4m3 self-loading concrete mixer trucks are better choices. All of them can ensure sufficient output and avoid waste. If the demand for concrete output is not too much and the output is less than 100m3 per day, then 1.2m3 and 1.8m3 self-loading concrete mixer trucks are completely sufficient.

3. Conclusion

How to choose self-loading concrete mixer trcuk is not a simple thing, you should not only select  according to your demands, but also according to some functions of the mixer truck and your own economic situation. If you have any questions on solution, you can contact our customer service staff directly.